Product Details:
| Size | 118X420X50mm |
| Usage/Application | Hospital |
| Material | PTFE |
| Brand | Trident |
| Atmospheric Pressure | 360cfm |
| Pipe Connection BSP | 11/2inch |
| Model Number | T600V |
- Borosilicate filter element 99.999% efficiency
- Compliant with HEALTH TECHNICAL MEMORANDUM2022
- Lightweight, corrosion-protected aluminium body
- Differential pressure gauge indicator for filter elementreplacement
- Sterilisable drain flask to capture biological fluids
- Vacuum flow rates from 3 to 68 litres/second
- Available in ½” to 3” pipe connections
Trident Medical Vacuum Filter Series:
Trident Medical Vacuum Filter series are designed to remove the liquid, solid and bacterial contamination from the suction side of the vacuum pump and the potential biological infection of the surrounding environment. The filter elements and housings are designed for medical use and can be utilized in hospitals, pharmaceutical laboratories, dentist’s surgery and other critical areas. Installed on suction side of vacuum pump to remove bacteria and prevent contamination to the pump and atmosphere. Biological liquids are collected in a transparent drain flask, which can be easily removed for sterilization. The flask should be visually checked daily and removed for cleaning and sterilization. The filter element must be replaced at least every 6 months or when the pressure drop reaches 100 mbar. The efficiency of the installed filter elements exceeds the 0.005% penetration specified in HTM 2022 for infectious disease units, when tested in accordance with BS 3928.
Correction factor mm Hg 760 380 252 188 150 Gauge reading in Hg 29.9 15.0 9.9 7.4 5.9 psi (abs) 14.7 7.4 4.9 3.6 2.9 Kpa (abs) 101 51 34 25 20 Correction factor - 1 2 3 4 5 Example : 1. Flow & vacuum at user end : 50 scfm, 380 mm Hg (gauge reading) 2. Since the catalogue specifies flow rates at atmospheric pressure, the suitable correction factor must be selected from the table - this is 2 in this case. Therefore, filter capacity required : 50 scfm / 2 = 25 scfm 3. From the table of models, choose the model that has the closest flow rate to the above value. In this case, it is 44 scfm, so model T600 V must be used. Penetration to BS 3928 <0.005% Particle removal 0.01 micron (99.999%) Maximum temperature 80oC (176oF ) Pressure loss-clean element 30 mbar (0.44 psi) Pressure loss-change element 100 mbar (1.5 psi) Maximum working pressure 7 barg (100 psig) Maximum working vacuum Full vacuum Filter element Borosilicate Construction material Extruded Aluminium Alloy Coating – External Epoxy Powder coating Drain type Hand shut-off valve with Sterilisable drain flask (capacity 100 ml)
Prices are vary as per model configuration.
